Termitor LED by Fahren

Termitor headlight bulbs are considered one of the best LED conversion kits available on Amazon. That’s because of the combination of top brightness, excellent durability, and precise beam pattern that can be perfectly adjusted for a specific vehicle application. They are exceptionally bright. Just imagine: these LED bulbs are 6 times as bright as your factory light bulbs. Besides, the lifespan of such bulbs is around 50.000 hours. This is truly impressive since you can forget what is headlight bulb replacement due to burnout. Great news, Termitor LEDs are very easy to install, as their shape and housing fit the factory headlight housing perfectly. So, they fit properly without modifications, and installation is just plug-and-play.

4.6
(45)

Termitor LED by Fahren

Technical characteristics

  • Wattage: 120 Watts
  • Color temperature: 6500K
  • Light output: 20.000 Lm [per pair]
  • Lifespan: 50.000 hours
  • Heat sink style: 12.000 RPM turbo cool fan
  • Voltage: DC9-32V

Termitor LED vs other Fahren LED Bulbs

Fahren Ursprung

  • 14.000 Lumens;

  • 6500K Cool White;

  • 30 Watts.

Fahren Scourge

  • 18.000 Lumens;

  • 6500K Cool White;

  • 100 Watts.

Fahren Krieges

  • 20.000 Lumens;

  • 6500K Cool White;

  • 120 Watts.

Fahren Termitor

  • 20.000 Lumens;

  • 6500K Cool White;

  • 120 Watts.

Fahren Forenner

  • 16000 Lumens;

  • 6500K Cool White;

  • 80 Watts.

What else makes Termitor LED so special?

  1. Easy installation. Plug-and-play fit factory housing without modifications.
  2. Corrosion-resistant. The body is made of aviation-grade aluminum that is resistant to rust.
  3. CAN-bus compatible. In the majority of cases, these LEDs do not require a load resistor or CAN-bus module to work error-free on US-built vehicles.
  4. Waterproof. Termitor LED by Fahren feature IP 68 protection level, so they are resistant to moisture and humidity.
  5. 360° adjustable beam. The adjustable locker ring can be rotated at 360, so you can move it in any direction to aim the light beam perfectly for your specific headlight setup.

Upgraded circuit board

Termitor LED series features an upscale circuit board. What does it mean to you? You are getting LED bulbs that come equipped with a board, that employs 120W power. This is the closest to a halogen bulb board. As a result, the board ensures that there are no flickering or error warnings for most cars. Besides, Termitor LED bulbs feature a built-in EMC system. It reduces the possibility of radio interference.

What is the difference between Fahren LED and halogen headlight bulbs?

Fahren LED bulbs allow you to see wider and farther. The ultra-slim design of Termitor LED headlight bulbs allows for perfect focus adjustment light beam. Also, it simulates the beam pattern of a halogen lamp. As a result, you are getting a brighter bulb that is focused exactly like the OEM halogen bulb. Also, the lower profile of the LED bulbs is only 0.94 inches, which makes it almost 1:1 design as halogen. As a result, it perfectly fits into your housing and factory sockets. No modifications are required! So, you get better on-road visibility without blinding the oncoming traffic. Max light output is capable of fixing any visual problems in front of the driver at night and gives it a wider and farther view of the road ahead and surroundings.

How useful was this post?

Click on a star to rate it!

Average rating 4.6 / 5. Vote count: 45

No votes so far! Be the first to rate this post.

7 Comments to “ Termitor LED by Fahren”

  1. Oliver Farkas says :Reply

    I would love to try these thermitor bulbs in H7 and HB!

  2. Joe Thaxton says :Reply

    I ordered a set of 9005/h11 upgraded 2023 termitor led lights off of Amazon. First time the lights worked for about 2 weeks and then quit. Amazon sent me a replacement pair and within one day the front left low beam quit working. All the lights flicker. It’s in a 2012 ram 1500. I also have the fog lights but that have not had any issues so far. Only the headlight bulbs.

    1. Kevin Livans says :Reply

      Hey Joe,
      I understand that you are facing issues with the Termitor LED lights you purchased from Amazon for your 2012 Ram 1500. It’s concerning that both the original set and the replacement set have exhibited problems so quickly. The flickering and failure of the bulbs could be due to several reasons:

      1. Compatibility Issues: Your vehicle’s electrical system might not be compatible with the LED bulbs without additional components. Sometimes, older vehicles are not set up for the lower power draw of LEDs, and this mismatch can cause flickering. A resistor kit or a CANbus decoder might be needed to ensure compatibility.
      2. Faulty Product: It’s also possible that the product itself is faulty. Given that both sets have failed quickly, this could be a quality issue with the Termitor LED lights.
      3. Installation Issue: If not installed correctly, the bulbs may not perform as expected. Make sure that the bulbs are properly seated and that all connections are secure.
      4. Electrical Issue with Vehicle: There could be an underlying issue with your vehicle’s electrical system that is causing the lights to malfunction.

      Here’s what you can do:

      1. Check Vehicle Compatibility: Consult the product documentation or contact the manufacturer to ensure that the LED bulbs are compatible with your 2012 Ram 1500. If they are not, ask about additional components that might be needed to make them work properly.
      2. Contact the Seller or Manufacturer: Reach out to the seller on Amazon or the manufacturer to report the issue. They might offer a refund or a different product that is more compatible with your vehicle.
      3. Consult a Mechanic: If you continue to have issues, it might be worthwhile to have a professional mechanic take a look at your vehicle’s headlight system to diagnose if there’s an underlying issue.

      Remember that functioning headlights are essential for safe driving, so it’s important to resolve this issue promptly.

  3. Gary Meyer says :Reply

    I have purchase 2 sets of the Termitor Fahren 2023 Upgraded H11/H9/H8 LED Headlight Bulbs thru Amazon. First set on Jan 29th 2023. Second set on Feb 5th. So far 1 of the 4 has been flickering. Starts fine then after about 5 mins dims down for a second the back. Does this vary often. Does not completely go out. This 1 of the 2 low beam, don’t know it either of the high beams are doing so far. Starting to switch them around to see if any others are acting the same.

    1. Kevin Livans says :Reply

      Hey Gary,
      it sounds like you might be experiencing an issue with one of the Termitor Fahren LED headlight bulbs you purchased. Flickering or dimming could be indicative of a few different problems:

      • Faulty Bulb: The bulb itself could be defective.
      • Incompatible Electrical System: Some vehicles’ electrical systems are not compatible with certain LED bulbs without additional components, such as a CANbus adapter, to prevent flickering.
      • Loose Connection: The bulb might not be seated properly in the socket, or there could be a loose wire.
      • Heat Issue: LEDs can sometimes flicker if they get too hot. Ensure that the bulb is installed in such a way that it can properly dissipate heat.

      Here are steps you can take to troubleshoot:

      1. Test the Bulb in Another Socket: Swap the flickering bulb with one of the other bulbs that isn’t flickering. If the problem follows the bulb, it’s likely a faulty bulb. If the flickering remains in the same socket, it’s likely an issue with the socket or vehicle’s electrical system.
      2. Check Connections: Ensure that the bulb is securely and properly seated in the socket and that there are no loose wires.
      3. Contact Manufacturer or Retailer: As the bulbs were purchased recently, they might still be under warranty. You can reach out to the seller on Amazon or contact the manufacturer directly to report the issue and ask for a replacement or support in resolving the problem.
      4. Consult a Mechanic: If you’re unable to determine the issue on your own, it may be wise to consult a professional mechanic who is familiar with automotive electrical systems. They might be able to identify whether additional components like a CANbus adapter are needed, or if there’s a different underlying issue.

      Remember to handle headlight bulbs carefully, as they can be fragile and hot if they’ve been recently used.

  4. Pablo Pepito Jr. says :Reply

    What LED bright bulbs for high and low beams fit for my 2015 Subaru Impreza.

    1. Kevin Livans says :Reply

      Hi there,
      Headlight Bulb High Beam – 9005
      Headlight Bulb Low Beam(with halogen headlights) – H11
      We hope this helps!

Leave a Reply

Your email address will not be published. Required fields are marked *